What method do you use to clean carpets

/

Drying the room after carpet cleaning

We use a powerful truckmounted steam clean unit.

Cleaning carpets using a powerful truck-mounted steam cleaning unit is an effective and professional method often referred to as hot water extraction or steam cleaning. Here's how the process typically works:

1. Preparation

  • Inspection: The carpet is thoroughly inspected to identify any heavily soiled areas, stains, or special cleaning requirements.

  • Pre-Vacuuming: The carpet is vacuumed to remove loose dirt, dust, and debris.

  • Furniture Removal: Any furniture that might obstruct the cleaning process is moved or protected with pads.

2. Pre-Treatment

  • Pre-Spray: A specialized cleaning solution is applied to the carpet, focusing on high-traffic areas and stains. This helps to break down dirt, grease, and oils.

  • Agitation: A machine or brush may be used to agitate the carpet fibers, ensuring the cleaning solution penetrates deeply.

3. Steam Cleaning (Hot Water Extraction)

  • Hot Water Injection: The truck-mounted unit heats water to a high temperature, often around 200°F (93°C) or higher. The heated water is then injected into the carpet fibers under high pressure.

  • Extraction: Simultaneously, a powerful vacuum extracts the water along with dissolved dirt, stains, and cleaning solution from the carpet. This step ensures that the carpet is left clean and nearly dry.

  • Spot Treatment: Any remaining spots or stains may be treated with additional specialized solutions.

4. Rinsing and Neutralizing

  • Rinse: A neutralizing rinse may be applied to ensure all cleaning residues are removed, leaving the carpet soft and fresh.

  • Final Extraction: Another round of extraction is performed to remove as much moisture as possible, reducing drying time.

5. Post-Cleaning Care

  • Grooming: The carpet fibers are groomed to help them dry evenly and to restore the pile’s appearance.

  • Drying: Air movers or fans may be used to speed up the drying process, which typically takes a few hours.

  • Final Inspection: The carpet is inspected to ensure the cleaning was thorough and meets quality standards.

This method is highly effective for deep cleaning, as the truck-mounted system provides superior power, heat, and suction compared to portable machines, ensuring a thorough clean and faster drying times.